One of the many things that gives Advanced Power Inc solar powered water well pumps the leading edge over our competition, is how easy our solar powered water well pumps are to install.
Our Advanced Power Inc. solar powered water well pumps only weigh 14 pounds, so this makes them extremely easy to lower into and raise out of wells if the time ever came where you needed to transport the pump to another location.
The API solar powered well pump will allow you to install your pump with or without the neighbors or hired hand helping, you can use help or normally one person can do it alone until you reach some greater depths.
All of our solar powered pumping kits come standard with solar modules, easy bolt together aluminum mounts for the modules and also equipped with 100' of submersible wire that can be taped to the poly pipe as your solar powered well pump is lowered into the well. (additional wire is available on request).
When possible we recommend that you install your pump using 1/2'' black roll poly pipe for easy roll up coming out of the well, without having to break joints apart such as you do with threaded PVC, this makes it extremely easy for one person to pull the pump, and allow the pipe to roll out on the ground behind you if you are by yourself and need to remove the pump from the well.
Advanced Power Inc. has a simple installation video available on our website www.solarpumps.com. You can view the video in about ten minutes and have a very good understanding of just how simple these systems are to install. http://www.youtube.com/watch?v=EKhYf8989oM We have also attached the youtube link here for your easy viewing.
We think once you see how easy it is to install a solar powered water well pumping system from Advanced Power Inc you will be convinced you can certainly do it yourself if you like.
www.solarpumps.com
www.solarpumps.com
No comments:
Post a Comment